Remora http://www.remora.ru Broad Selection. Deep Analysis. Cut Above. Tue, 07 Dec 2010 07:19:56 +0000 http://wordpress.org/?v=2.9.2 en hourly 1 Profiles http://www.remora.ru/lang/en/profiles http://www.remora.ru/lang/en/profiles#comments Sat, 03 Jul 2010 13:45:50 +0000 Вадим http://www.remora.ru/?p=632
]]>
]]> http://www.remora.ru/lang/en/profiles/feed 0 Stone processing machines http://www.remora.ru/lang/en/machines-toc http://www.remora.ru/lang/en/machines-toc#comments Mon, 21 Jun 2010 04:50:49 +0000 Вадим http://www.remora.ru/?p=314

  1. Pneumatic driller
  2. Electro-hydraulic drilling machines
  3. Divaricating gushions
  4. Horizontal pneumatic drilling unit
  5. Hidraulic line drilling unit
  6. Cranes
  7. Quarry

…

]]>

Pneumatic driller with down-the-hole hammer

Electro-hydraulic drilling machines for vertical and horizontal holes

Divaricating gushions

Horizontal pneumatic drilling equipment

Hidraulic line drilling unit for dimensional stone quarries

Cranes Cranes Cranes

Variable Speed wire saw for cuts of any size in Marble and Granite. Variable Speed wire saw for cuts of any size in Marble and Granite. Variable Speed wire saw for cuts of any size in Marble and Granite.

Complete one man operated mobile drilling unit

Pneumatic block-cutters on rails Pneumatic block-cutters on rails

Mobile hydraulic line drilling unit for dimensional stone quarries

Diamond wire saw for dressing and slabbing blocks

Diamond wire saw for profiling with numerical control system

Gang saw

Bush-hammering Flaming Sandblasting Machine

Polishing Machine

Multiple Diamond Wire Saw

Compressor Automatic electronic sawing machine

  1. Pneumatic driller
  2. Electro-hydraulic drilling machines
  3. Divaricating gushions
  4. Horizontal pneumatic drilling unit
  5. Hidraulic line drilling unit
  6. Cranes
  7. Quarry wire saw
  8. Mobile drilling unit
  9. Pneumatic block-cutters on rails
  10. Mobile hydraulic line drilling unit
  11. Diamond wire saw for dressing and slabbing blocks
  12. Diamond wire saw for profiling
  13. Gang saw
  14. Bush-hammering Flaming Sandblasting Machine
  15. Polishing Machine
  16. Multiple Diamond Wire Saw
  17. Compressor
  18. Automatic electronic sawing machine
  19. Multipurpose stone-working Center
]]> http://www.remora.ru/lang/en/machines-toc/feed 0 Сырье http://www.remora.ru/lang/en/materials-toc http://www.remora.ru/lang/en/materials-toc#comments Mon, 21 Jun 2010 04:38:03 +0000 Вадим http://www.remora.ru/?p=350


]]>


]]> http://www.remora.ru/lang/en/materials-toc/feed 0 Herpimar http://www.remora.ru/lang/en/herpimar http://www.remora.ru/lang/en/herpimar#comments Sun, 28 Nov 2010 13:42:07 +0000 Вадим http://www.remora.ru/?p=1253 Herpimar buch hammering tools]]>
]]> http://www.remora.ru/lang/en/herpimar/feed 0 Keen® concept http://www.remora.ru/lang/en/keen%c2%ae-concept http://www.remora.ru/lang/en/keen%c2%ae-concept#comments Sun, 26 Sep 2010 22:16:03 +0000 Вадим http://www.remora.ru/?p=1222 Following the 10 years success story of NEXT®, eurotungstene has developed, through an ongoing process of innovation, a new pre-alloyed range of powders: Keen®. Specially designed for abrasive and severe materials, Keen® is a new technical and economical alternative to…

]]> Following the 10 years success story of NEXT®, eurotungstene has developed, through an ongoing process of innovation, a new pre-alloyed range of powders: Keen®. Specially designed for abrasive and severe materials, Keen® is a new technical and economical alternative to traditional binders for the Diamond Tool industry.

keen-1 ]]> http://www.remora.ru/lang/en/keen%c2%ae-concept/feed 0 The Keen® range http://www.remora.ru/lang/en/the-keen%c2%ae-range http://www.remora.ru/lang/en/the-keen%c2%ae-range#comments Sun, 26 Sep 2010 22:15:23 +0000 Вадим http://www.remora.ru/?p=1238

Pure Keen®

Keen® premixed

Keen® granules
Keen®10
Keen®20		 KX1290
KX2250
KX2920		 Keen®11
Keen®21
KX1291
]]>

Pure Keen®

Keen® premixed

Keen® granules
Keen®10
Keen®20		 KX1290
KX2250
KX2920		 Keen®11
Keen®21
KX1291
]]> http://www.remora.ru/lang/en/the-keen%c2%ae-range/feed 0 Technical performances http://www.remora.ru/lang/en/technical-performances http://www.remora.ru/lang/en/technical-performances#comments Sun, 26 Sep 2010 22:12:49 +0000 Вадим http://www.remora.ru/?p=1236 Keen®10

  • Similar behaviour to standard extra-fine cobalt.
  • Mainly dedicated to general construction applications.
  • High ductility and standard cobalt hardness.

Keen®20

  • Unique hardness and ductility combination.
  • Dedicated to abrasive materials, high power applications.

…

]]> Keen®10

  • Similar behaviour to standard extra-fine cobalt.
  • Mainly dedicated to general construction applications.
  • High ductility and standard cobalt hardness.

Keen®20

  • Unique hardness and ductility combination.
  • Dedicated to abrasive materials, high power applications.
keen-2 ]]> http://www.remora.ru/lang/en/technical-performances/feed 0 Keen®main advantages http://www.remora.ru/lang/en/keen%c2%aemain-advantages http://www.remora.ru/lang/en/keen%c2%aemain-advantages#comments Sun, 26 Sep 2010 22:11:23 +0000 Вадим http://www.remora.ru/?p=1234
  • High ductility.
  • No oxidation.
  • Cheaper than other traditional binders such as cobalt.
  • Excellent alternative to cobalt.
    • ]]>
  • High ductility.
  • No oxidation.
  • Cheaper than other traditional binders such as cobalt.
  • Excellent alternative to cobalt.
    • ]]>     http://www.remora.ru/lang/en/keen%c2%aemain-advantages/feed 0     Hardness as a function of sintering temperature (hot pressing) http://www.remora.ru/lang/en/hardness-as-a-function-of-sintering-temperature-hot-pressing http://www.remora.ru/lang/en/hardness-as-a-function-of-sintering-temperature-hot-pressing#comments Sun, 26 Sep 2010 22:10:11 +0000 Вадим http://www.remora.ru/?p=1232 Keen®10

    Recommended sintering parameters for most applications: 850°C 350 kg/cm2/5mn

    Keen®20

    Recommended sintering parameters for most applications: 950°C 400 kg/cm2/5mn

    ]]>     keen-3

    Keen®10

    Recommended sintering parameters for most applications: 850°C 350 kg/cm2/5mn

    Keen®20

    Recommended sintering parameters for most applications: 950°C 400 kg/cm2/5mn

    ]]>     http://www.remora.ru/lang/en/hardness-as-a-function-of-sintering-temperature-hot-pressing/feed 0     Keen® Premixed http://www.remora.ru/lang/en/keen%c2%ae-premixed http://www.remora.ru/lang/en/keen%c2%ae-premixed#comments Sun, 26 Sep 2010 22:07:48 +0000 Вадим http://www.remora.ru/?p=1229 Keen® can be mixed with traditional additives to optimize the tool performances.

    Improved free cutting

    • Lower sintering temperature.
    • Technical and economical solutions.
    Keen®10 + 10% Bronze 85/15 Recommendation:

    Bronze 85/15 (BR2314)
    Recommended sintering temperature: 825°C

    …

    ]]>     Keen® can be mixed with traditional additives to optimize the tool performances.

    Improved free cutting

    • Lower sintering temperature.
    • Technical and economical solutions.
    Keen®10 + 10% Bronze 85/15 Recommendation:

    Bronze 85/15 (BR2314)
    Recommended sintering temperature: 825°C
    Pressure: 350 kg/cm2

    		 Applications:

    Fast cutting for cured concrete and standard construction material.
    Keen®10 + 10% Iron + 10% Bronze 85/15 Recommendation:

    Iron (FE2010)
    Bronze 85/15 (BR2314)
    Recommended sintering temperature: 800°C
    Pressure: 350 kg/cm2

    		 Applications:

    More ductility than Keen® + Bronze formula.
    Keen®10 + 10% Bronze 89/11 Recommendation:

    Bronze 89/11 (BR1351)
    Recommended sintering temperature: 920°C
    Pressure: 350 kg/cm2

    		 Applications:

    Fast cutting for fresh concrete and abrasive materials.

    Improved tool life

    • More abrasion resistance.
    • High level of impact strength.
    KX1290 (Keen®10 + 10% Ni) Formula:

    Nickel (2.5µm)
    Recommended sintering temperature: 825°C
    Pressure: 350 kg/cm2

    		 Applications:

    Increased tool life for cured concrete and standard construction materials, more specifically in core drills.
    Keen®10 + 10% Ni + 10% WC Recommendation:

    Nickel (2.5µm)
    CW5522 (3.0µm)
    Recommended sintering temperature: 850°C
    Pressure: 350 kg/cm2

    		 Applications:

    Increased tool life for cured concrete and standard construction materials.
    Keen®20 + 10% Ni + 20% WC Recommendation:

    Nickel (2.5µm)
    CW5522 (3.0µm)
    Recommended sintering temperature: 975°C
    Pressure: 375 kg/cm2

    		 Applications:

    Very abrasive and severe construction materials.
    ]]>     http://www.remora.ru/lang/en/keen%c2%ae-premixed/feed 0